Classic cars are in our souls

Classic cars are unique pieces in our memory. Not only for its beauty, but for what they mean in the history of each of our lives. So this blog is for all of us who feel a special emotion when we see a classic car

Classic cars are in our souls

Classic cars are unique pieces in our memory. Not only for its beauty, but for what they mean in the history of each of our lives. So this blog is for all of us who feel a special emotion when we see a classic car

Classic cars are in our souls

Classic cars are unique pieces in our memory. Not only for its beauty, but for what they mean in the history of each of our lives. So this blog is for all of us who feel a special emotion when we see a classic car

Classic cars are in our souls

Classic cars are unique pieces in our memory. Not only for its beauty, but for what they mean in the history of each of our lives. So this blog is for all of us who feel a special emotion when we see a classic car

Classic cars are in our souls

Classic cars are unique pieces in our memory. Not only for its beauty, but for what they mean in the history of each of our lives. So this blog is for all of us who feel a special emotion when we see a classic car

quarta-feira, 30 de setembro de 2020

1959 Jaguar XK 150 'S' Roadster - Oh my God - is PERFECT




What would turn out to be the final glorious incarnation of Jaguar’s fabulous ‘XK’ series of sports car arrived in 1957. As its nomenclature suggests, the XK150 was a progressive development of the XK120 and XK140, retaining the same basic chassis, 3.4-litre engine and four-speed Moss transmission of its predecessors while benefiting from a new, wider body that provided increased interior space and improved visibility courtesy of a single-piece wrap-around windscreen, replacing the XK140’s divided screen. Cleverly, the new body used many XK120/ 140 pressings, the increased width being achieved by means of a 100mm-wide central fillet. A higher front wing line and broader radiator grille were other obvious differences, but the new model’s main talking point was its Dunlop disc brakes. Fade following repeated stops from high speed had been a problem of the earlier, drum-braked cars, but now the XK had stopping power to match its prodigious straight-line speed.

Introduced in the spring of 1957, the XK150 was available at first only in fixed and drophead, ‘2+2’ coupé forms, the open two-seater version not appearing until the following year. Disc brakes apart, the chassis remained much as before, as did the 3.4-litre, six-cylinder engine that produced 190bhp as standard or 210bhp in ‘Special Edition’ form when fitted with the ‘B’-type cylinder head. The four-speed Moss gearbox continued while overdrive and automatic transmission were optional. “The Jaguar XK150 is undeniably one of the world’s fastest and safest cars. It is quiet and exceptionally refined mechanically, docile and comfortable..we do not know of any more outstanding example of value for money”, concluded the authoritative Autocar magazine.

For those who demanded even greater performance an ‘S’ option became available concurrently with the launch of the sportiest ‘OTS’ (open two-seater) roadster bodystyle. Distinguishable by its gold painted, straight port head, the ‘S’ boasted triple SU carburettors, free flow inlet manifold, 9:1 pistons, lead bronze bearings and a lightened flywheel, these features helping to liberate 250bhp. The later 3.8 version claimed an extra 15bhp but experts agree that the 3.4 ‘S’ is the sweetest of all XK engines.

Buick Invicta Convertible - Good Memories

 


The Buick Invicta is a full-size automobile produced by Buick from 1959 to 1963.

The Invicta was a continuation of the Buick Century concept that mated the standard size Buick LeSabre (pre-1959, Buick Special) body with Buick's larger 401 cubic inch Nailhead V8 engine, yielding what was referred to as "the banker's hot rod." The name was derived from Latin and signified 'unconquerable, invincible, unbeatable, unvanquished' according to Buick Motor Division sales training materials.

The Invicta series was introduced as a full line of body styles for model year 1959. Sales never approached that of either the entry-level LeSabre or top level Electra models, but were consistent with the traditional sales penetration of Buick's sporty mid-priced models (the 1954 to 1958 Century and 1963 to 1970 Wildcat). The Invicta continued the tradition of installing Ventiports on the front fenders from the Century.

In a survey of 1959 Buick owners in the March, 1959 issue of Popular Mechanics, 47.1% of owners like the ride comfort, though many (25.2%) said the drive shaft tunnel was too big.

Starting in 1960, an Invicta Custom trim package was offered, featuring bucket seats and a 'consolette' in the hardtop coupe, convertible and wagon and a leather bench seat with a center armrest on some 4 door hardtops. Sales were nominal.

Reccording to Robin Moore's 1969 book The French Connection, "the 1960 Buick Invicta had a peculiarity in body construction conducive to the installations of...extraordinary, virtually detection-proof traps concealed within the fenders and undercarriage" that made it a popular model for international heroin smugglers.

Mercedes-Benz W10 - Type Mannheim 350 (1929 - 1930)

In contemporary records the car was also frequently identified according to the widely used period German generic naming conventions as the “Mercedes-Benz 14/70 PS”, reflecting its “fiscal” and “actual” horsepower respectively.

In essence the car followed the construction of the Mercedes-Benz W03. However, the wheelbase was reduced by 230 mm (9 inches), and the vehicle even in standard form was a little lighter. In addition to the “Tourer” (two-door four-seater cabriolet) body, the car was available as a four-door saloon and a “Pullman Limousine”

The straight-six 3444 cc engine was carried over from the W03, delivering 70 PS (51 kW) to the rear wheels through a three-speed gear box controlled via a centrally mounted lever. Both axles were rigid, suspended on semi-elliptical leaf springs. Cable-operated brakes provided stopping power to all four wheels. The stated maximum speed was 95 km/h (59 mph).

segunda-feira, 28 de setembro de 2020

Austin-Healey 3000 - beautiful and very well maintained

 


The Austin-Healey 3000 is a British sports car built between 1959 and 1967. It is the best known of the "Healey" models. The body of the car was made by Jensen Motors and the vehicles were assembled at BMC's MG Works in Abingdon, alongside the corporation's MG models.

During its production life, the car went from an open sports car, albeit with an option to transport 2 + 2 children, to a convertible sports car.

In 1963, 91.5% of all Austin-Healey 3000 cars were exported; mainly for North America.

The 3-liter 3000 was a highly successful car that won its class in many European rallies at its peak and is still run in classic car competitions by enthusiasts today.

British Motor Corporation stopped manufacturing in 1967, intending to replace its car with a new, albeit similar, engine in a more recently designed monocoque MGB variant, called MGC.

Chevrolet Impala 1959 - Second generation - Beautiful like before

 


The 1959 Chevrolet Impala was redesigned. Sharing bodyshells with lower-end Buicks and Oldsmobiles as well as with Pontiac, part of a GM economy move, the Chevrolet's wheelbase was 1-1/2 inches longer. Using a new X-frame chassis, the roof line was three inches lower, bodies were two inches wider, and curb weight increased. Its tailfins protruded outward, rather than upward. The taillights were a large "teardrop" design at each side, and two slim-wide nonfunctional front air intake scoops were added just above the grille.

The Impala became a separate series, adding a four-door hardtop and four-door sedan, to the two-door Sport Coupe and convertible. Sport Coupes featured a shortened roof line and wrap-over back window. The standard engine was an I6, while the base V8 was the carryover 283 cu in (4.6 L), at 185 hp (138 kW). Optional were a 283 cu in with 290 hp (220 kW) and 348 cu in (5.7 L) V8 up to 335 hp (250 kW). Standard were front and rear armrests, an electric clock, dual sliding sun visors, and crank-operated front vent windows. A contoured hooded instrument panel held deep-set gauges. A six-way power seat was a new option, as was "Speedminder", for the driver to set a needle at a specific speed and a buzzer would sound if the pre-set was exceeded.The 1960 Impala models reinstated three round taillights on each side, and a white band running along the rear fenders.

The available V8s were reduced to seven, in 283-cu in or 348-cu in displacements. The carbureted Turbo-Fire 283 cu in V8 could have either 170 or 230 hp (130 or 170 kW). The 348 cu in was available in 250 to 320 hp (190 to 240 kW) with a 350 hp (260 kW) Special Super Turbo-Thrust with triple two-barrel carburetors, 11.25:1 compression ratio, and dual exhausts. Fuel injection was no longer an option on full-size Chevrolets. New to the options list was speed and cruise control.Production was 490,000 units.

Right-hand drive cars were made in Oshawa, Ontario, Canada, for New Zealand, Australia, and South Africa and assembled locally from CKD or SKD kits. The right-hand drive dashboard was a mirror image of the 1959 Chevrolet panel and shared with equivalent right-hand drive Pontiac models. Australian models were assembled by hand on the GMH Holden assembly lines.

MERCEDES-BENZ 280 SE 3.5 CABRIOLET (W 111) - I LOVE IT SO MUCH



The Mercedes-Benz W111 was a chassis code given to a range of Mercedes-Benz vehicles produced between 1959 and 1971, including four-door sedans (1959-1968) and two-door coupés and cabriolets (1961 to 1971).

Introduced as in-line 6-cylinder cars with 2.2-liter engines, the W111 spawned two lines of variants: entry-level vehicles sharing their chassis and body, but with four-cylinder engines they were designated as the W110. A luxurious version built on the W111 chassis with its body and the six-cylinder M186 engine with six-cylinder fuel injection was designated the W112.

Mercedes-Benz emerged from World War II as an automaker in the early 1950s, with the expensive 300 Adenauers and the exclusive 300 S tourers that gained fame, but it was the simple monobloc Pontons that made up the bulk of the company's revenue.

Pontons replacement work began in 1956 with a design focused on passenger comfort and safety. Ponton's basic cab was enlarged and square, with a large glass greenhouse improving the driver's visibility. A milestone in the car's design was the front and rear crumple zones to absorb kinetic energy on impact. The automaker also patented retractable seat belts.

The body was modern and featured characteristic American-style squiggles that gave the models the nickname Heckflosse - the German for "fintail".

Production history
Sedan

Mercedes-Benz 220b
Serial production of the 4-door sedan began in August 1959, which made its debut at the Frankfurt Motor Show in the fall. Initially the series consisted of 220b, 220Sb and 220SEb. These replaced (W105) 219, (W180) 220S and (W128) 220SE Ponton sedans respectively. The 220b was an entry-level version with little chrome finish, simple hubcaps and a basic interior finish that had no door pockets. Prices were DM 16,750, 18,500 and 20,500, with a gross sales rate of 1: 2: 1.

All modes shared the 2195 cc in-line six-cylinder M127 engine transported from the previous generation, producing 95 hp (71 kW) at 4800 rpm and capable of accelerating the heavy car to 160 km / h (155 if equipped with gearbox optional automatic). The 220Sb featured dual carburetors and produced 110 hp (82 kW) at 5000 rpm, increasing the top speed to 165 km / h (103 mph) (160 km / h (99 mph)) and improving 0-100 km / h (62 mph) acceleration to 15 seconds (16 on 220b). The top 220SEb range included a Bosch fuel injection that produced 120 hp (89 kW) at 4800 rpm, with a top speed of 172 km / h (107 mph) (168 km / h (104 mph) for auto) and a 0 –100 km / h (62 mph) time of 14 seconds.




Mercedes-Benz 220Sb
In 1961, the W111 chassis and body were shared with the even more basic 4-cylinder W110 and a luxurious W112 version built on the W111 chassis with its body and Type 300 6-liter M189 6-cylinder engine with standard power features and a high level of internal and external finishing. The body of the W110 featured a shorter hood compared to the W111.

A 2-door coupe / cabriolet version of the W111 / W112 was also produced.




Mercedes-Benz 220Sb

In May 1965, the 220Sb and 220SEb were replaced by the new 230S. It was visually identical to the 220S, with a modernized 2306 cm3 M180 engine with two Zenith carburetors producing 120 hp (89 kW) at 5400 rpm. The maximum speed is 176 km / h (109 mph) (174 km / h (108 mph) in automatic), the acceleration from 0 to 100 km / h (62 mph) is 13 seconds (15 with automatic transmission). As a successor to the 220b, Mercedes-Benz also introduced the 230, with the 2306 cm3 engine installed in the W110 series car. A total of 41,107 230S models were built until January 1968, when the last of the 4-door windows left the production line.

Coupé and cabriolet

Mercedes-Benz 280SE Coupe (USA)

The boxes almost disappeared in the two-door versions
The design of a replacement for the two-door Pontons started in 1957. Since most of the chassis and powertrain would be unified with the sedan, the scope was focused on the external style. Some of the prototypes and prototypes show that Mercedes-Benz tried to give the two-door car a front style almost identical to what would be realized on the Pagoda roadster, but ultimately favored the work of engineer Paul Bracq. The rear had small tailfins, subtle compared to those of the bodies and evocative of the square style of the W108 / W109.

Production began in the late 1960s, with the coupe making its debut on the 75th anniversary of the opening of the Mercedes-Benz Museum in Stuttgart, in February of the following year. The convertible followed at the Frankfurt Motor Show a few months later. Almost identical to the coupe, the soft top roof folded into a recess behind the rear seat and was covered by a tightly fitting leather "boot" in the same color as the seats. Unlike the previous generation of the two-door ponton series, the 220SE designation was used for both the coupe and the convertible; both received the same version of the 2195 cc M127 engine. Prices in 1962 were 32,500 for the coupe and 36,000 NLG for the cabriolet. Options included a sliding sunroof for the coupe, automatic transmission, power steering and individual rear seats.




Mercedes-Benz 220SE Convertible
In March 1962, Mercedes-Benz launched the exclusive two-door 300SE with M189 engine. Like the 300 sedan, it was based on the W111 chassis, but shared Daimler's 2996 cm3 engine and the unique W112 chassis designation, efforts on the part of Mercedes to distance it from the automaker's modest W110 and W111 lines and joints to the prestigious two-door luxury sports tour W188 300S. It was distinguished by a chrome strip and featured air suspension and a higher level of internal trim and finish. Prices were 45,000 and 48,500 for hard and soft roofs, respectively.

In the summer of 1965, Mercedes-Benz launched replacements for the W111 and W112 sedans, the W108 and the W109, respectively. With tailfin fashion well eroded in the mid-1960s, the new design was based on the contained W111 coupe, enlarged and square. Work on a future new chassis that would completely replace the Ponton-derived W111 / W112 and W108 / W109 was already underway. With a concept car of the first S-Class shown in 1967, Daimler refused to develop a two-door W108 / W109 vehicle, continuing the production of the aging W111 / W112 with modest changes. The 220SE was replaced in the early fall of 1965 by the 250SE, which featured the new 2496 cm3 M129 engine. Producing 150 hp (112 kW) at 5500 rpm, it gave the vehicle a significant improvement in top speed, 193 km / h (188 km / h (117 mph) with automatic transmission) and 0-100 km / h (62 mph) time acceleration of 12 seconds (14 with automatic transmission). Visible changes include new 14-inch rims, which came with new hub cabs and beautiful rings, accommodating the largest disc brakes and the new rear axle of the W108 family.


Mercedes-Benz 280SE Coupe
In November 1967, the 250 SE was replaced by the 280 SE. It was powered by the new 2778 cc M130 engine, which produced 160 hp (119 kW) at 5500 rpm. The top speed was hardly affected, but the acceleration from 0-100 km / h (62 mph) improved to 10.5 seconds (13 with automatic transmission). Inside, the car received an option of wood veneer on the instrument panel and other minor changes, including door lock buttons and different heating levers. The hubcaps were changed again to a new one-piece cover, and the outer mirror was changed.

Despite its smaller engine, the 280 SE could outperform the early 1950s, with the M189 equipped with 300 SE, resulting in the retirement of the more expensive model. The coupe and cabriolet maintained the designation of the shared model until they were replaced by a new generation chassis in 1968.




The 280 SE 3.5

Mercedes-Benz updated the W111 280SE to include an optional 3.5-liter V8 engine
A final model was added in August 1969, the 280 SE 3.5, Mercedes' first post-war coupe with more than 3 liters. The car was equipped with the brand new M116 3499 cc V8. It produced 200 hp (150 kW) at 5800 rpm and a top speed of 210 km / h (205 km / h with automatic transmission) and 0-100 km / h (62 mph) in 9.5 seconds (11.5 for the automatic transmission). As one of several changes to modernize the design of aging, a lower and wider grid has been incorporated; this was not a side effect of enlarging the engine compartment to accommodate the V8 despite popular belief. The front and rear bumpers have also been modified with the addition of rubber friction strips; the rear lenses have changed to a flatter cleaning design. This change was made to the 280 SE standard. As the top of its range, the 280 SE 3.5 is seen as an ideological successor to the W112 300 SE,

although the W112 air suspension was missing.

There were plans to place the larger M117 V8 engine on the W111 (the model would have been called the 280 SE 4.5). [Citation needed]

The last 280 SE were produced in January 1971, with the 280 SE 3.5 ending in July. The total production over the decade was: 220 SEb - 16,902, 250 SE - 6,213, 280 SE - 5,187 and 280 SE 3.5 - 4,502 units. Not including the 3,127 W112 300 SE models, the grand total of the 2-door W111 models was 32,804, of which 7,456 were convertible.

The indirect replacement for the Coupé was the C107 SLC, which was an SL Coupé, therefore, it was not linked to the S Class line. The true successor to the W111 / 12 Coupe was the 1981 C126 Coupe. As the R107 SL became larger and more luxurious, it took the top position in the Convertible range, which meant that the four-seat convertible would disappear from Mercedes - Benz for almost two decades, until the A124 in 1992.

Bentley Blower No.1 - A fast and beautiful champion

Bentley Blower No.1 is a racing car developed from the Bentley 4½ Litre by Sir Henry "Tim" Birkin to win the Le Mans twenty-four-hour race. The car was developed into its current form for racing at Brooklands.

In 1921 Sir Henry "Tim" Birkin turned to motor racing, competing in a few races at Brooklands. Business and family pressure then forced him to retire from the tracks until 1927 when he entered a three-litre Bentley for a six-hour race. For 1928 he acquired a 4½ litre car and after some good results decided to return to motor racing, very much against his family's wishes. Soon Birkin was one of the Bentley Boys, described as "the greatest Briton of his time" by W. O. Bentley.[2] In 1928 Birkin entered the Le Mans race again, leading the first twenty laps until a jammed wheel forced him to drop back, finishing fifth. He won the race in 1929, racing the Speed Six as co-driver to Woolf Barnato.

Base car

Main article: Bentley 4½ Litre

W. O. Bentley wanted a more powerful car, so he developed a bigger model, the Speed Six.

It was a huge car. Ettore Bugatti once referred to the Bentley as "the world's fastest lorry" ("Le camion plus vite du monde").

Bentley adhered strictly to his own assertion that increasing displacement is always preferable to forced induction:

To supercharge a Bentley engine was to pervert its design and corrupt its performance

However, in the winter of 1926/7, chassis FR5189, a 3-litre car, was the first car fitted with a supercharger at the factory. Using a Roots-type blower over the front axle, it was unsuccessfully raced by May Cunliffe in 1927.

By 1928, Birkin had come to the same conclusion that the future lay in getting more power from a lighter model, by fitting a supercharger to the 4½ litre Bentley. When Bentley Motors refused to create the supercharged model, Birkin determined to develop it himself.

Development

Birkin set up his own engineering works for the purpose of developing the car at Welwyn Garden City, Hertfordshire. With financial backing from Dorothy Paget, a wealthy horse racing enthusiast financing the project after his own money had run out,and technical help from Clive Gallop, Birkin engaged supercharger specialist Amherst Villiers.

 Mercedes-Benz had been using compressors for a few years.

In the pursuit of power, the 4½ Litre Bentley engine had a distinct advantage. A single overhead camshaft actuated four valves per cylinder, inclined at 30 degrees, a technically advanced design at a time where most cars used only two valves per cylinder.[8][9] Secondly the cars tanks - radiator, oil and petrol - had filler caps that did not unscrew but were easily removed with one stroke of a lever. This saved time during stops.

W.O. believed that the supercharger corrupted his design. The huge Roots-type supercharger, known in racing circles as a blower, was added in front of the radiator and driven straight from the crankshaft. This gave the Blower Bentley a unique and easily recognisable profile, and exacerbated its understeer.

The crankshaft, pistons and lubrication system were also special to the Blower engine.

A guard protected the two carburetters located at the compressor intake. Similar protection was used (both in the 4½ Litre and the Blower) for the fuel tank at the rear, because a flying stone punctured the 3 Litre of Frank Clement and John Duff during the first 24 Hours of Le Mans, possibly depriving them of victory.

The mechanical additions and modifications took the power of the base car from:

Unblown: touring model 110 bhp (82 kW); racing model 130 bhp (97 kW)

Blower: touring model 175 bhp (130 kW) @ 3,500rpm; racing model 242 bhp (180 kW) @ 2,400 rpm

The Blower Bentley was born, more powerful than the 6½ Litre despite lacking the two additional cylinders.

The downside was that Blower Bentleys consumed 4 litres of fuel per minute at full speed.

Production

The original No.1 had a taut canvas top stretched over a lightweight Weymann aluminium frame, housing a two-seat body. This presented a very light but still resistant to wind structure. It was officially presented in 1929 at the British International Motor Show at Olympia, London.

No.1 first appeared at the Essex six hour race at Brooklands on 29 June 1929. However, the car initially proved to be very unreliable. W.O. had never accepted the Blower Bentley, but with effective company owner and financial backer Barnato's support,[14] Birkin persuaded W.O. to produce the fifty supercharged cars necessary for the model to be accepted for Le Mans.

In addition to these production cars built by Bentley Motors, Birkin put together a racing team of four remodelled prototypes plus a spare

No.1: a track car for Brooklands, but with headlights and mudguards

No.2, 3 and 4: road registered (No.2 - GY3904;[15] No.3 - GY3905)

No.5: a fifth car, registered for the road, assembled from spare parts

Racing

While the naturally aspirated 4½ Litre was noted for its good reliability, the supercharged models were generally not.

1929

Birkin entered No.1 in a 500 miles (800 km) endurance race at Brooklands in 1929. However, during the race its lightweight fabric two-seater body caught fire due to a cracked exhaust. Earning itself the nickname the Brooklands Battleship, as after putting the fire out Birkin kept racing. Paget resultantly paid for No.1 to be re-bodied with a single aluminium shell by Reid Railton, and painted in their racing red colour.

1930

Le Mans

The cars were too late for Le Mans in 1929, hence Birkin's co-driving of the Speed Six, and only two of the cars reached the start line in 1930. After an epic duel between Dudley Benjafield and Birkin's privately entered Blower Bentleys, and Rudolf Caracciola's Mercedes SSK, all three retired leaving the victory to the Bentley works team Speed Six of Barnato and Glen Kidston. According to some, Birkin's courage and fearless driving, in particular his selflessly harrying Caracciola into submission, are regarded as embodying the true spirit of the vintage racing era.

French Grand Prix

For 1930, motor sports enthusiast Eugène Azemar, who was involved with the Tourist Board in Saint-Gaudens in southern France, succeeded in persuading the Automobile Club du Midi to arrange a Grand Prix race in the region. Laying out a triangular, Le Mans-type track, the circuit became known as the Circuit de Morlaas.

Hoping to run the race to the International Formula, when the response was poor the event was postponed and changed to a Formula Libre event instead. The new date meant that the Italian teams were unable to attend, leaving it to be mostly an internal French affair with sixteen Bugattis, two Peugeots and a Delage among the twenty five starters. Birkin did not race No. 1, he raced the second road race-prepared supercharged 4.5., registered UR 6571.

The race distance was twenty five laps of the 15.8 kilometres (9.8 mi) track, making a total of 396 kilometres (246 mi). Philippe Étancelin nursed his Bugatti Type 35 home with a 2.5 minute lead to take victory, Birkin was next, 14 seconds behind, and Zanelli third.[14][16]

1931Bentley Motors withdrew from racing in 1930, and closed down the following year. It was purchased by Rolls-Royce Limited in 1931, which did not authorise racing for a few more. Dorothy Paget withdrew her support for Birkin's racing team in October 1930, but continued to support Birkin in No.1.

In 1930, the Daily Herald offered a trophy for the fastest driver at an event at Brooklands. The first year, Birkin and Kaye Don competed in opposing Blower tourers, with Kaye winning with a speed of 137.58 miles per hour (221.41 km/h). In 1932, Tim Birkin won driving his red Blower Monoposto, clocking 137.96 mph (222.03 km/h).

The track record stood for two years, before being beaten by John Cobb driving the 24 litre Napier-Railton.

MERCEDES-BENZ W 111 250 SE COUPE - A family sports car. Perfect

The Mercedes-Benz W111 was a chassis code given to a range of Mercedes-Benz vehicles produced between 1959 and 1971, including four-door sedans (1959-1968) and two-door coupés and cabriolets (1961 to 1971). Their bodywork featured distinctive American-style tailfins that gave the models their Heckflosse nickname — German for "fintail".
Introduced with a 2.2-litre inline 6-cylinder engine, the W111 spawned a pair of variant lines which bracketed it in 1961: downscale entry-level inline 4-cylinder engined vehicles sharing the W111 chassis and bodies, designated the W110; and the W112, a high-end luxury sedan built on the W111 chassis with its body but exclusive features, elaborate appointments, and the Mercedes-Benz 300d Adenauer's fuel-injected 3-litre M189 six-cylinder engine – at the time the company's largest.

Somewhat confusingly, both the W111 and W112 lines included vehicles with different Paul Bracq-designed bodywork, the 2-door coupe and cabriolet.


Design
Mercedes-Benz emerged from World War II as an automaker in the early 1950s with the expensive 300 Adenauers and exclusive 300 S grand tourers that gained it fame, but it was the simple unibody Pontons which comprised the bulk of the company's revenues.

Work on replacing the Pontons began in 1956 with a design focused on passenger comfort and safety. The basic Ponton cabin was widened and squared off, with a large glass greenhouse improving driver visibility. A milestone in car design were front and rear crumple zones for absorbing kinetic energy on impact. The automaker also patented retractable seatbelts.

The body was modern and featured characteristic American-style tailfins that gave the models their Heckflosse nickname — German for "fintail".

Production history
Sedan

Mercedes-Benz 220b
Series production of the 4-door sedan began in August 1959, which made its debut at the Frankfurt Auto Show in autumn. Initially the series consisted of the 220b, 220Sb, and 220SEb. These replaced the (W105) 219, the (W180) 220S and the (W128) 220SE Ponton sedans respectively. The 220b was an entry-level version with little chrome trim, simple hubcaps, and basic interior trim that lacked pockets on doors. Prices were DM16,750, 18,500 and 20,500, with a rough sales ratio of 1:2:1.

All models shared the 2195 cc M127 straight-six engine carried over from the previous generation, producing 95 hp (71 kW) at 4800 rpm and capable of accelerating the heavy car to 160 km/h (155 if fitted with optional automatic gearbox). The 220Sb featured twin carburettors and produced 110 hp (82 kW) at 5000 rpm, raising top speed to 165 km/h (103 mph) (160 km/h (99 mph)) and improving 0–100 km/h (62 mph) acceleration to 15 seconds (16 on the 220b). The top range 220SEb featured Bosch fuel injection producing 120 hp (89 kW) at 4800 rpm, with a top speed of 172 km/h (107 mph) (168 km/h (104 mph) for auto) and a 0–100 km/h (62 mph) time of 14 seconds.


Mercedes-Benz 220S
In 1961, the W111 chassis and body were shared with the even more basic 4-cylinder W110 and a luxury W112 version built on the W111 chassis with its body and the Type 300 series' 3-litre M189 big block 6-cylinder engine, many standard power features, and a high level of interior and exterior trim. The body of the W110 featured a shorter hood, compared to the W111.


Mercedes-Benz 220Sb
In May 1965, the 220Sb and 220SEb were replaced by the new 230S. It was visually identical to the 220S,[citation needed] with a modernised 2306 cm3 M180 engine with twin Zenith carburettors producing 120 hp (89 kW) at 5400 rpm. Top speed is 176 km/h (109 mph) (174 km/h (108 mph) on auto), acceleration from 0-100 km/h (62 mph) is 13 seconds (15 with automatic transmission). As a successor to the 220b, Mercedes-Benz also introduced the 230, with the 2306 cm3 engine fitted into the W110 series car. A total of 41,107 230S models were built through January 1968, when the last of 4-door fintails left the production line.

During its ten-year run between 1959 and 1968 a total of 337,803 W111s were built.

Coupé and cabriolet

The fintails were almost gone on two-door versions
Design of a replacement for the two-door Pontons began in 1957. Since most of the chassis and drivetrain were to be unified with the sedan, the scope was focused on the exterior styling. Mercedes chose the work of engineer Paul Bracq, which featured a more squarish, subtle rear-end treatment, more evocative of the later squarish styling of the subsequent W108/W109 than the sharp-edged tailfins of the sedan.



Production began in late 1960, with the coupe making its debut at the 75th anniversary of the opening of Mercedes-Benz Museum in Stuttgart in February of the next year. The convertible followed at the Frankfurt Auto Show a few months later. Almost identical to the coupe, its soft-top roof folded into a recess behind the rear seat and was covered by a tightly fitting leather "boot" in the same color as the seats. Unlike the previous generation of two-door ponton series, the 220SE designation was used for both the coupe and convertible; both received the same version of the 2195 cc M127 engine. Prices in 1962 were 32,500 for the coupe and 36,000 NLG for the cabriolet. Options included a sliding sunroof for the coupe, automatic transmission, power steering, and individual rear seats.


Mercedes-Benz 280SE Coupe (US)

Mercedes-Benz 280SE Coupe
In March 1962, Mercedes-Benz released the exclusive two-door M189-powered 300SE. Like the 300 sedan, it was based on the W111 chasis but shared both Daimler's top-range 2996 cm3 fuel-injected engine and the unique W112 chassis designation, efforts on Mercedes' part to distance it from the maker's modest W110 and W111 lineups and link it to the prestigious W188 300S two-door luxury sports tourer. It was distinguished by a chrome strip, and featured air suspension and a higher level of interior trim and finish. Prices were 45,000 and 48,500 for the hard and soft roofs respectively.

In summer of 1965 Mercedes-Benz launched replacements for both W111 and W112 sedans, the W108 and W109 respectively. With the tailfin fashion well eroded by the mid 1960s, the new design was based on the restrained W111 coupe, widened and squared off. Work on a future new chassis that would fully replace the Ponton-derived W111/W112 and W108/W109 was well under way. With a concept car of the first S-Class was shown in 1967,[citation needed] Daimler declined to develop a two-door W108/W109 vehicle, instead continuing production of the aging W111/W112 with modest changes. The 220SE was superseded in early autumn 1965 by the 250SE, which featured the new 2496 cm3 M129 engine. Producing 150 hp (112 kW) at 5500 rpm, it gave the vehicle a significant improvement in top speed, 193 km/h (120 mph) (188 km/h (117 mph) with automatic transmission), and 0–100 km/h (62 mph) acceleration time of 12 seconds (14 with automatic transmission). Visible changes include new 14-inch rims, which came with new hub cabs and beauty rings accommodating the larger disk brakes and new rear axle from the W108 family.


Since the W108 and W109 were only available as 4-door models, 2-door W111 and W112 coupés and cabriolets like this 1969 280SE are frequently mistaken for them
In November 1967 the 250 SE was superseded by the 280 SE. It was powered by the new 2778 cc M130 engine, which produced 160 hp (119 kW) at 5500 rpm. Top speed was hardly affected, but acceleration from 0-100 km/h (62 mph) improved to 10.5 seconds (13 with automatic transmission). Inside, the car received a wood veneer option on the dashboard and other minor changes, including door lock buttons and different heater levers. The hubcaps were changed yet again to a new one piece wheelcover, and the exterior mirror was changed.

Despite its smaller engine, the 280 SE could outperform the early 1950s M189 powered 300 SE, resulting in the more expensive model's retirement.

The 280 SE 3.5

Mercedes-Benz upgraded the W111 280SE to include an optional 3.5 litre V8 engine
A final model was added in August 1969, the 280 SE 3.5, the first Mercedes post-War coupe with more than 3 litres. The car was fitted with the brand-new M116 3499 cc V8. It produced 200 hp (150 kW) at 5800 rpm, and a top speed of 210 km/h (130 mph) (205 km/h (127 mph) with automatic transmission) and a 0-100 km/h (62 mph) at 9.5 seconds (11.5 for the automatic transmission). As one of several changes to modernize the aging design a lower, wider grille was incorporated and the facelifted model is often by the Germans referred to as the "flachkühler". The new grill was not a side-effect of enlarging the engine compartment to accommodate the V8 despite popular belief. Front and rear bumpers were also modified with the addition of rubber rub strips; the rear lenses changed to a flatter cleaner design. This change was carried across the standard 280 SE. As the top of its range, the 280 SE 3.5 is seen as an ideological successor to the W112 300 SE, though it lacked the W112's air suspension.


There were plans to place the larger M117 V8 engine in the W111 (the model would have been called 280 SE 4.5).[citation needed]

The last 280 SE was produced in January 1971, with the 280 SE 3.5 ending in July. The total production over the decade was: 220 SEb - 16,902, 250 SE - 6,213, 280 SE - 5,187, and 280 SE 3.5 - 4,502 units. Not including 3,127 W112 300 SE models, the grand total of 2-door W111 models was 32,804 of which 7,456 were convertibles.

The indirect replacement for the Coupé was the C107 SLC, which was an SL Coupé, it therefore had no link with the S Class range. The true successor of the W111/12 Coupe was the C126 Coupe of 1981. As the R107 SL grew bigger and more luxury oriented, it assumed the position of the top of the range Convertible, which meant the four-seater convertible would disappear from Mercedes-Benz's lineup for nearly two-decades, until the A124 in 1992.